Equinox™ Laser IR scope mount lamping kit
Sold Out
Opticfire Equinox™ high power ultra compact VCSEL IR laser illuminator.
FEATURED IN GUNMART MAGAZINE MARCH 2022 click here
VCSEL IR laser diode combined with a 44mm Frenzel lens for superb crisp long range IR Illumination.
Compatible with all digital & tubed night vision devices including PARD NV007, NV008 ATN PULSAR etc.
LED IR versions also available as well as visible light colours white, red & green (select from the drop menu).
All LED's have three mode settings high/med/low with memory. Short press to turn torch on/change mode - Long press to turn torch off.
PLEASE NOTE: Infrared (IR) light is invisible to the human/animal eye & will require an infrared camera or night vision equipment to be able to see.
Also be aware that not all infrared cameras & night vision scopes will pick up 940nm IR light. This is because 940nm is much further away from the visible light spectrum than 850nm making it harder for a camera sensor to pick up. Check that the camera equipment you are using is compatible before you buy.
SCOPE MOUNT LAMPING KIT INCLUDES
1 x Opticfire Equinox™ Lamp
1 x LED/LASER pill unit colour of your choice
1 x Standard on/off illuminated switch
1 x Opticfire 18650 battery
1 x Remote pressure switch
1 x Adjustable scope mount (choose from drop menu)
EQUINOX™ FEATURES
44mm Frenzel lens
Twist zoom adjuster - spot/flood
Shockproof aluminium construction
'O' ring sealed waterproofing
Illuminated on/off switch
Easy Interchangeable LED pill system (sold separately)
Power source: 1 x 18650 battery
Dimensions: 44mm (HD) 30mm (BD) 140mm (L)
Weight: 200g (without battery)
Battery MUST be inserted positive (+) end in first failure to do so will cause damage and will void your warranty.
ADJUSTABLE WINDAGE/ELEVATION WEAVER RAIL SCOPE MOUNT FEATURES
If your struggling to centre your torch beam with your cross hairs then this is the mount you need.
Can be adjusted vertically & horizontally to achieve perfect torch alignment.
Allows you to quickly attach or detach your lamp to a 20mm weaver/picatinny rail
Suitable for torch body diameter 30mm
ADJUSTABLE WINDAGE/ELEVATION TORCH SCOPE MOUNT FEATURES
If your struggling to centre your torch beam with your cross hairs then this is the mount you need.
Can be adjusted vertically & horizontally to achieve perfect torch alignment.
Suitable for torch body diameter 25mm-30mm - Scope diameter 25mm (1 inch).
REMOTE PRESSURE SWITCH FEATURES
✧ Silent on/off activation
✧ Length - 400mm (coiled) 650mm (uncoiled)
BATTERY & CHARGER FEATURES
- Capacity - 3600 mAh
- Voltage - 3.7v
- Dimensions - 18mm * 70mm
XTAR MC1 charger is a portable USB charger which can rescue your over-discharged batteries. It costs only one battery’s price. It is a mini and light weight charger, but it can charge no matter the small cells like 10440 or the big cell like 26650!
Compatible with all 5V USB power adapters including mobile phone chargers, solar panel, PC USB, power banks etc.
LASER SAFETY
Always remove the battery when not in use or changing lens
Always remove battery before removing from rifle
Never look into the lens
Do not expose any part of your body to the beam
Treat a laser as you would a firearm
Keep away from children & store securely
Do not point at reflective surface
12 MONTH UK WARRANTY
If purchased directly from our website or an authorised dealer, your Opticfire product is guaranteed against defects in material and workmanship. If your item is found to be defective under normal use within 12 months of the proof of purchase date it will be repaired or replaced free of charge. This warranty does not cover accidental damage, unreasonable use, product alteration or improper maintenance or repair by anyone other than Opticfire UK. Failure to follow the general maintenance directions could result in damage to your lamp/ torch that may not be covered by this warranty.
If your product should prove defective, it will be repaired or replaced under these terms. Please contact us before sending anything back.
