TX-38 Scope mount lamping kit

Opticfire® LED UK

TX-38 short/med range 150+ yrds


The Opticfire TX-38 T38 zoomable torch features a specially designed solid glass aspheric convex lens & an interchangeable LED pill system that enables the colour of LED light to be changed easily without the use of any specialist tools - Simply unscrew the LED pill unit from the torch body using your fingers & replace it with your preferred colour.

NEW HIGH POWER OSRAM SFH 4703AS 810nm Infrared available.



Osram Opto Semiconductors is expanding its offering of high-power infrared LEDs for illumination solutions to include a new wavelength (810 nm).

Increased range – same optical output

This new wavelength comes with the added bonus that the spectral sensitivity of typical camera sensors is higher in this range than it is for 860 and 940 nm. Using a light source with the same optical output, an 810 nm system will achieve a greater detection distance than was previously possible.

PLEASE NOTE: Infrared (IR) light is invisible to the human/animal eye & will require an infrared camera or night vision equipment to be able to see.

Also be aware that not all infrared cameras & night vision scopes will pick up 940nm IR light. This is because 940nm is much further away from the visible light spectrum than 860nm making it harder for a camera sensor to pick up. Check that the camera equipment you are using is compatible before you buy.

This kit only includes one LED pill colour of your choice.


Additional LED pill units can be purchased separately.

This kit now includes an XTAR MC1 portable USB charger for safe & convenient charging.

KIT INCLUDES

1 x Opticfire TX-38 torch


1 x LED pill unit 


1 x Scope mount 


1 x Standard glow-in-the-dark switch


1 x Remote pressure switch


1 x XTAR MC1 portable USB charger


1 x Opticfire 18650 battery 3600 mah 

1 x Protective case (optional + £10)

TX-38 FEATURES 

  • 38 mm glass aspheric convex Lens
  • Twist zoom adjuster - spot/flood
  • Shockproof aluminium construction
  • 'O' ring sealed waterproofing 
  • Easy Interchangeable LED pill system 
  • Glow in the dark switch (standard)
  • Interchangeable on-off switch standard/remote 
  • Low maintenance - High performance
  • Power source: 1 x 18650 
  • Dimensions: 42mm (HD) 22mm (BD) 135mm (L)
  • Weight: 157g (without batteries)

SCOPE MOUNT FEATURES

Opticfire Universal scope mount with large easy grip adjuster.

fits scope diameter 25mm - 30mm 

✧ Length -110mm 

✧ Width - 31mm

✧ Weight - 90g 

OPTICFIRE 18650 BATTERY FEATURES

High power lithium battery with built in circuit protection and no memory effect, meaning you can charge it whenever you want without damaging it. Installed poly switch will cut off power if battery discharge current is more than 6.6 Ah.

✧ Capacity - 3600 mAh


✧ Voltage - 3.7v


✧ Dimensions - 18mm * 70mm

 

XTAR MC1 USB CHARGER

XTAR MC1 charger is a portable USB charger which can rescue your over-discharged batteries. It costs only one battery’s price. It is a mini and light weight charger, but it can charge no matter the small cells like 10440 or the big cell like 26650!

Compatible with all 5V USB power adapters including mobile phone chargers, solar panel, PC USB, power banks etc.

 

12 MONTH UK WARRANTY

If purchased directly from our website or an authorised dealer, your Opticfire product is guaranteed against defects in material and workmanship. If your item is found to be defective under normal use within 12 months of the proof of purchase date it will be repaired or replaced free of charge. This warranty does not cover accidental damage, unreasonable use, product alteration or improper maintenance or repair by anyone other than Opticfire UK. Failure to follow the general maintenance directions could result in damage to your lamp/ torch that may not be covered by this warranty.


If your product should prove defective, it will be repaired or replaced under these terms. Please contact us before sending anything back.





Related Items