TX-67 Long range 400 yrds+
The Opticfire TX-67 T67 zoomable torch features a specially designed solid glass aspheric convex lens & an interchangeable LED pill system that enables the colour of LED light to be changed easily without the use of any specialist tools - Simply unscrew the LED pill unit from the torch body using your fingers & replace it with your preferred colour.
This lamping kit includes one LED pill colour of your choice - red, green, white or infrared (IR)
Additional LED pill can be purchased separately.
PLEASE NOTE: Infrared (IR) light is invisible to the human/animal eye & will require an infrared camera or night vision equipment to be able to see.
Also be aware that not all infrared cameras & night vision scopes will pick up 940nm IR light. This is because 940nm is much further away from the visible light spectrum than 860nm making it harder for a camera sensor to pick up. Check that the camera equipment you are using is compatible before you buy.
1 x TX-67 torch
1 x LED pill
1 x Scope mount
1 x Remote pressure switch
1 x Standard glow-in-the-dark switch
1 x Xtar MC2 USB charger
2 x Opticfire 18650 battery
1 x Protective case (optional + £10)
TX-67 TORCH FEATURES
✧ 67mm glass aspheric Lens
✧ Twist zoom adjuster - spot/flood
✧ Shockproof aluminium construction
✧ 'O' ring sealed waterproofing
✧ Interchangeable LED pill system
✧ Standard glow-in-the-dark on/off switch
✧ Interchangeable on-off switch standard/remote
✧ Low maintenance - High performance
✧ Power source: 2 x 18650 or 2 x 26650 battery
✧ Dimensions: 71mm (HD) 30mm (BD) 220mm (L)
✧ Weight: 510g (without batteries)
Opticfire Universal scope mount with large easy grip adjuster. fits scope diameter 25mm - 30mm
✧ Length -110mm
✧ Width - 31mm
✧ Weight - 90g
REMOTE PRESSURE SWITCH
Provides precision on/off control with minimal fuss.
✧ 2 mode switches
✧ on/off lock
✧ on/off pressure release
✧ Length - 450 mm (coiled) 700mm (uncoiled)
OPTICFIRE 18650 RECHARGEABLE BATTERY
High power lithium battery with built in circuit protection and no memory effect, meaning you can charge it whenever you want without damaging it. Installed poly switch will cut off power if battery discharge current is more than 6.6 Ah.
✧ Capacity - 3600 mAh
✧ Voltage - 3.7v
✧ Dimensions - 18mm * 70mm
XTAR MC2 CHARGER
The XTAR MC2 charger is the perfect light weight on the go dual bay USB charger.
The Xtar MC2 can charge x2 batteries on the go at the same time. It has all the features you would expect from the leading name in this industry.
Charge two batteries simultaneously and independently.
Intelligently identify input power and automatically adjust suitable charge current(0.25A/0.5A).
LED indicators do real-time display of battery state.
Three-stage charge algorithm(TC-CC-CV).
Over heat protection. When operate in high temperature, MC2 will automatically lower charge current to prevent over-heating burns.
Built-in reverse-polarity and short-circuit protection circuit.
0V activation and soft-start function.
MC2 has under voltage lockout and self-start function.
Automatically stop when charge complete.
Compatible with 10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650/18700/ 22650/25500/26650 3.6V/3.7V Li-ion batteries.
Compact portable size which is perfect for travelling.
12 MONTH UK WARRANTY
If purchased directly from our website or an authorised dealer, your Opticfire product is guaranteed against defects in material and workmanship. If your item is found to be defective under normal use within 12 months of the proof of purchase date it will be repaired or replaced free of charge. This warranty does not cover accidental damage, unreasonable use, product alteration or improper maintenance or repair by anyone other than Opticfire UK. Failure to follow the general maintenance directions could result in damage to your lamp/ torch that may not be covered by this warranty.
If your product should prove defective, it will be repaired or replaced under these terms. Please contact us before sending anything back.